1 / 5
Development Boards
EdgeTinker Lite
SKU: ETPCB0003
ESP32-C6 development board with LoRa / LoRaWAN, Wi-Fi 6, Bluetooth LE and Zigbee, plus on-board motion, temperature, humidity and VOC sensors, a real-time clock and microSD. Built to sleep for battery-powered projects.
Price on request
Coming soonAt a glance
- Microcontroller
- ESP32-C6-MINI-1-H4 (Espressif)
- Flash
- 4 MB
- Wireless
- Wi-Fi 6 (802.11ax) 2.4 GHz, Bluetooth LE, IEEE 802.15.4 (Zigbee)
- LoRa module
- RAK3172-T-9-SM-I, 915 / 920 / 923 MHz
Tags
Overview
EdgeTinker Lite is a development board for battery-powered wireless projects. An ESP32-C6 runs your code and gives you Wi-Fi 6, Bluetooth LE and Zigbee. A RAK3172 module adds long-range LoRa and LoRaWAN, driven from the ESP32-C6 low-power UART.
Motion, temperature, humidity and VOC sensors, a real-time clock and a microSD socket are already on the board. The board is built to sleep: the sensors and SD card sit on a 3.3 V rail your code can switch off.
Ideal for
- LoRaWAN sensor nodes
- LoRa to Wi-Fi, Bluetooth LE or Zigbee bridges
- Environmental data loggers
- Wake-on-motion trackers
- ESP32-C6 and Qwiic prototyping
Good to know
- The sensors, RTC supply, microSD and I2C pull-ups are off after reset. Set IO2 high to power them, including before using external I2C devices on the Qwiic connector or headers.
- There is no battery charger on this revision: USB powers the board but does not charge the battery.
- Connect a LoRa antenna to the IPEX connector before transmitting.
- Fit a CR1220 cell if the real-time clock should keep time while the board is unpowered.
- All GPIOs are 3.3 V logic and are not 5 V tolerant.
Hardware V1 RevC. The datasheet is preliminary: electrical values have not yet been measured on hardware.
Key features
- ESP32-C6-MINI-1 with 4 MB flash: Wi-Fi 6, Bluetooth LE and Zigbee (IEEE 802.15.4)
- RAK3172 LoRa / LoRaWAN module with an IPEX connector for an external antenna
- LIS2DH12 accelerometer with wake-on-motion, AHT20 temperature and humidity, AGS10 VOC gas sensor
- PCF85063A real-time clock with CR1220 backup cell holder, and a microSD socket
- Switchable 3.3 V peripheral rail for low sleep current
- Two USB-C ports: CH343P USB-to-UART with auto-download, and ESP32-C6 native USB
- Runs from USB or a 1.8 to 5.5 V battery, with automatic switchover
- Qwiic I2C connector and 2.54 mm headers for the ESP32-C6 and RAK3172 pins
Specifications
| Parameter | Value |
|---|---|
| Microcontroller | ESP32-C6-MINI-1-H4 (Espressif) |
| Flash | 4 MB |
| Wireless | Wi-Fi 6 (802.11ax) 2.4 GHz, Bluetooth LE, IEEE 802.15.4 (Zigbee) |
| LoRa module | RAK3172-T-9-SM-I, 915 / 920 / 923 MHz |
| LoRa antenna | External, IPEX connector |
| Sensors | LIS2DH12 accelerometer, AHT20 temperature and humidity, AGS10 VOC |
| Real-time clock | PCF85063A with CR1220 backup |
| Storage | microSD socket (SPI) |
| USB | 2 × USB-C (CH343P USB-to-UART, ESP32-C6 native USB) |
| Power input | 5 V USB or 1.8–5.5 V battery (JST XH 2-pin) |
| Regulator | TPS63900 buck-boost, 3.3 V, 400 mA |
| Logic level | 3.3 V (not 5 V tolerant) |
| Expansion | Qwiic I2C (JST SH 4-pin), two 2×7 headers, 2×5 socket |
| Header pitch | 2.54 mm |
| Battery charger | Not included |
| Hardware revision | V1 RevC |
| SKU | ETPCB0003 |
Documents & Downloads
- EdgeTinker Lite datasheet (Rev 0.2, preliminary) Datasheet · pdf · 5.1 MB Download
- Edgetinker Lite Pinout (V1 Revc) (1) Pinout · pdf · 375 KB Download
- Edgetinker Lite Block Diagram (V1 Revc) Other · pdf · 105 KB Download
- Edgetinker Lite Power Tree (V1 Revc) Other · pdf · 114 KB Download
- Edge Tinker Lite V1 Rev C Schematic · pdf · 1.3 MB Download
Documentation and guides
Pinout, schematics, quick start and firmware guides for this product are in the wiki.